|
|
Ok, clarify for me. The EC2 manual I have has mod 9 for "fine tuning" the MAP - the latest upgrade I got from Tracy indicated the default MAP was considerably improved - and that turned out to be the case - just needed some adjustment at the lowest and highest end.
So is the EC2 mod 9 "Fine Tuning" the "Autotune" - or is that something else requiring the Em2??
Ed
Ed Anderson
Rv-6A N494BW Rotary Powered
Matthews, NC
eanderson@carolina.rr.com
----- Original Message ----- From: "Bob White" <rlwhite@comcast.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Sunday, January 08, 2006 6:35 PM
Subject: [FlyRotary] Auto Tune Instructions Not Needed
Hi Bob,
You'll need some instructions for sure, or one of us will have to look it up
for you. I haven't done it, but I believe you have to set the EM-2 up in
the real time MAP viewing mode, then do something to tell it to start
autotuning. I'll be reading that later this afternoon myself, and can send
you the instructions later if needed.
Rusty
Hi Rusty,
OK, I've been studying my manuals. The auto tune instructions are
there in the latest EM2 manual that I have. I upgraded the EC2, but I
think that was for the primer feature instead of auto tune. Thanks for
the offer.
Bob W.
-- http://www.bob-white.com
N93BD - Rotary Powered BD-4 (first engine start 1/7/06)
Custom Cables for your rotary installation -
http://www.roblinphoto.com/shop/
--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
|
|