Received-SPF: none
 receiver=logan.com; client-ip=216.148.227.89; envelope-from=rlwhite@comcast.net
Date: Sun, 8 Jan 2006 16:35:50 -0700
From: Bob White <rlwhite@comcast.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Auto Tune Instructions Not Needed
Message-Id: <20060108163550.966ad64d.rlwhite@comcast.net>
In-Reply-To: <list-917473@logan.com>
References: <list-917473@logan.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit


> Hi Bob,
>  
> You'll need some instructions for sure, or one of us will have to look it up
> for you.  I haven't done it, but I believe you have to set the EM-2 up in
> the real time MAP viewing mode, then do something to tell it to start
> autotuning.  I'll be reading that later this afternoon myself, and can send
> you the instructions later if needed.  
>  
> Rusty
>  
>
 
Hi Rusty,

OK, I've been studying my manuals.  The auto tune instructions are
there in the latest EM2 manual that I have.  I upgraded the EC2, but I
think that was for the primer feature instead of auto tune.  Thanks for
the offer.

Bob W.


-- 
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (first engine start 1/7/06)
Custom Cables for your rotary installation -
http://www.roblinphoto.com/shop/