Received-SPF: none
 receiver=logan.com; client-ip=216.148.227.89; envelope-from=rlwhite@comcast.net
Date: Sun, 8 Jan 2006 08:30:36 -0700
From: Bob White <rlwhite@comcast.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: First Engine Start
Message-Id: <20060108083036.56923a35.rlwhite@comcast.net>
In-Reply-To: <list-917473@logan.com>
References: <list-917473@logan.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

On Sun, 8 Jan 2006 09:24:31 -0600
"Russell Duffy" <13brv3@bellsouth.net> wrote:

> I'm going to have to talk to Tracy about that.  I twisted his arm and
> made him send me the instructions for modifying the PC board for the
> new chips he's using.  (Didn't want to give up the EC2 in case I needed
> it.)  I don't think I have any instructions for using autotune, so
> maybe I'm not using it. 
> 
>  
> Hi Bob,
>  
> You'll need some instructions for sure, or one of us will have to look it up
> for you.  I haven't done it, but I believe you have to set the EM-2 up in
> the real time MAP viewing mode, then do something to tell it to start
> autotuning.  I'll be reading that later this afternoon myself, and can send
> you the instructions later if needed.  
>  
> Rusty
>  

Thanks Rusty,

If it's not too much trouble, please send the instructions.  It looks
like it will be Tuesday before I can get to the airport again.  I
definitely haven't found the real time MAP mode yet.

Bob W.


-- 
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (first engine start 1/7/06)
Custom Cables for your rotary installation -
http://www.roblinphoto.com/shop/