Received-SPF: none
 receiver=logan.com; client-ip=216.148.227.151; envelope-from=rlwhite@comcast.net
Date: Sat, 7 Jan 2006 19:27:32 -0700
From: Bob White <rlwhite@comcast.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: First Engine Start
Message-Id: <20060107192732.f773d744.rlwhite@comcast.net>
In-Reply-To: <list-917015@logan.com>
References: <list-917015@logan.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

Hi Bob,

It must have been, at least on my part.  Right now I'm exhausted. :)

Bob W.


On Sat, 7 Jan 2006 20:01:38 -0600
"Bob Perkinson" <bobperk@bellsouth.net> wrote:

> Congratulations on the first start Bob, I can only imagine the nervous
> excitement that was in the air.
> 
> Bob Perkinson
> Hendersonville, TN.
> RV9 N658RP Reserved
> If nothing changes
> Nothing changes
> 
> 
> 
> 
> -----Original Message-----
> From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]On
> Behalf Of Bob White
> Sent: Saturday, January 07, 2006 7:44 PM
> To: Rotary motors in aircraft
> Subject: [FlyRotary] First Engine Start
> 
> 
> 
> I'm happy to report that I actually started my engine today.  The only
> terrifying event was due to a momentary brain fade on my part.  For
> some reason I was thinking the throttle had to be all the way in to be
> off.  Not sure why I got that into my head.  Maybe because I've kept it
> in that position just so it was out of the way while I worked on the
> electrical for the last month.  Any way, I cranked it over, it sort of
> fired a little but did't start.  I hit the cold start switch and BAM,
> it took off at WOT.  Sorry to say I don't know what the RPM reading was
> as I was flipping every switch I could get my hands on to get it
> stopped.  Glad I had primed the oil pump with the starter the other
> day.  So the first 10 seconds or so of my first start was at WOT.  Also
> glad I had a prop on it.
> 
> I got that all sorted out and restarted the engine.  I ran it for 10-20
> minutes and noted some random parameters.  Today's goal was to start the
> engine, not take data.  I ran till the oil temp read 156 and water 182
> before I shut it down.  Oil pressure at first start indicated 97 psi.
> I didn't check at shutdown.
> 
> The gear box seemed to rattle around 1000 rpm, but it idles pretty good
> above 1200 or so.  (I need to start reading some of the EC2 and EM2
> instructions.)  I made no attempt to set mixture or anything, and all of
> the sensors are using the default settings.  The actual values may
> change as I get calibration data.  I do have Tracy's latest self
> adjusting mixture feature, and it did seem like the engine smoothed out
> as it ran.
> 
>  tried to take some video of the first start, but for some reason it
> didn't work. The tape moved but nothing was recorded.  Later I recorded
> running the engine again.  As soon as I relearn how to get it onto the
> computer, I will post a short clip on my web site.
> 
> *Jerry Hey's Cool Tube Exhaust system.
> 
> The best I can tell, this exhaust is doing a great job.  I took one
> quick reading from the wing tip on the exhaust side of the plane.  I
> saw 97 db on mode C and about 3000 rpm (Radio Shack sound meter).  I
> will get more complete data in days to come.  There were a half dozen
> people standing around watching all this, and no one mentioned anything
> about the exhaust noise.
> 
> All I can say is I'm thrilled to reach this milestone.
> 
> Bob W.
> 
> --
> http://www.bob-white.com
> N93BD - Rotary Powered BD-4 (The engine is running)
> Custom Cables for your rotary installation -
> http://www.roblinphoto.com/shop/
> 
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/
> 
> 
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/


-- 
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (Projected engine start - maybe today)
Custom Cables for your rotary installation -
http://www.roblinphoto.com/shop/