X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from imf20aec.mail.bellsouth.net ([205.152.59.68] verified) by logan.com (CommuniGate Pro SMTP 5.0.3) with ESMTP id 864962 for flyrotary@lancaironline.net; Mon, 05 Dec 2005 22:19:34 -0500 Received-SPF: pass receiver=logan.com; client-ip=205.152.59.68; envelope-from=atlasyts@bellsouth.net Received: from ibm62aec.bellsouth.net ([65.11.41.212]) by imf20aec.mail.bellsouth.net with ESMTP id <20051206031846.CAAV14587.imf20aec.mail.bellsouth.net@ibm62aec.bellsouth.net> for ; Mon, 5 Dec 2005 22:18:46 -0500 Received: from [192.168.0.100] (really [65.11.41.212]) by ibm62aec.bellsouth.net with ESMTP id <20051206031845.QNZB17681.ibm62aec.bellsouth.net@[192.168.0.100]> for ; Mon, 5 Dec 2005 22:18:45 -0500 Mime-Version: 1.0 (Apple Message framework v746.2) To: Rotary motors in aircraft Message-Id: <119E7C60-F23C-45C1-BC9C-8790436EA6D8@bellsouth.net> Content-Type: multipart/alternative; boundary=Apple-Mail-16-913114072 From: Bulent Aliev Subject: Turbo installation Date: Mon, 5 Dec 2005 22:18:56 -0500 X-Mailer: Apple Mail (2.746.2) --Apple-Mail-16-913114072 Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed Here is something interesting about how to install a new turbo. Buly Installation guide for your new turbocharger Attention: When you purchase a turbocharger you only own half of what you bought, the rest is all in the installation. The whole procedure is very simple. If you install the turbo by yourself and not follow directions you may lose everything you have invested into your turbocharger. We are not responsible for any broken turbocharger that is caused by improper and/or wrong installation. 1. First of all you would need to drain out the original dirty engine oil and fill in new oil to the engine oil line. 2. Switch on your vehicle by rotating the key 8-10 times (Do not step on the gas, just rotate the key to make the engine to work only). Drain out the dirty oil (This procedure is for cleaning your engine). Repeat this procedure 2 times. 3. Now your engine is completely clean. Replace the oil filter from your oil pipe, after that fill in clean engine oil until the oil begin to drip. The engine oil should be the fresh CD class 15W-40 pressure boost engine oil. Also the current position of the engine oil should be about 5mm above the engine oil line. 4. Now we start to install the turbocharger. Tighten all bolts on the turbine housing, compressor housing, and he bearing housing. Connect the corresponding pipes to the correct position of the turbocharger, except the compressor housing side. When you connect the pipe to the turbocharger DO NOT use any kind of glue on the gasket to seal it up. The glue will decrease the flux of the oil and break the turbocharger. 5. Hold the end of the compressor wheel to stop the shaft from rotating. Ask the driver to start the engine, let the engine idle for 20 seconds to circulate the engine oil. (Do not step on the gas) 6. After 20 seconds, release the compressor wheel and connect the last pipe that is corresponding to the compressor housing. Let the engine idle for 15 minutes. Ok we did it! The hard part is over! 7. Now for the last part. It would be best if you change your engine oil before test driving your vehicle. --Apple-Mail-16-913114072 Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset=ISO-8859-1 Here is something interesting = about how to install a new turbo.
Buly

Installation guide for your new = turbocharger


Attention: When you purchase a turbocharger = you only own half of what you bought, the rest is all in the = installation.=A0 The whole procedure is very simple.=A0 If you install = the turbo by yourself and not follow directions you may lose everything = you have invested into your turbocharger.=A0 We are not responsible for = any broken turbocharger that is caused by improper and/or wrong = installation.

=A0


1. =A0 =A0 First of all you would need to = drain out the original dirty engine oil and fill in new oil to the = engine oil line.

2. =A0 =A0 Switch = on your vehicle by rotating the key 8-10 times (Do not step on the gas, = just rotate the key to make the engine to work only).=A0 Drain out the = dirty oil (This procedure is for cleaning your engine).=A0 Repeat this = procedure 2 times.

3. =A0 =A0 Now = your engine is completely clean.=A0 Replace the oil filter from your oil = pipe, after that fill in clean engine oil until the oil begin to drip.=A0 = The engine oil should be the fresh CD class 15W-40 pressure boost engine = oil.=A0 Also the current position of the engine oil should be about 5mm = above the engine oil line.=A0

4. =A0 =A0 Now we = start to install the turbocharger. =A0 Tighten all bolts on the turbine = housing, compressor housing, and he bearing housing.=A0 Connect the = corresponding pipes to the correct position of the turbocharger, except = the compressor housing side.=A0 When you connect the pipe to the = turbocharger DO NOT use any kind of glue on the gasket to seal it up.=A0 = The glue will decrease the flux of the oil and break the = turbocharger.=A0

5. =A0 =A0 Hold = the end of the compressor wheel to stop the shaft from rotating.=A0 Ask = the driver to start the engine, let the engine idle for 20 seconds to = circulate the engine oil.=A0 (Do not step on the = gas)

6. =A0 =A0 After = 20 seconds, release the compressor wheel and connect the last pipe that = is corresponding to the compressor housing.=A0 Let the engine idle for = 15 minutes.=A0 Ok we did it! The hard part is = over!

7. =A0 =A0 Now for = the last part.=A0 It would be best if you change your engine oil before = test driving your vehicle.=A0


= --Apple-Mail-16-913114072--