|
|
Bob,
Nothing's ever easy is it!
George ( down under)
> Hi George,
>
> I haven't found anywhere on the web that there are the kind of cross
> references like I can find for GM. Even then it was fairly difficult
> to figure out what the commercial part was for the LS1 truck coils.
>
> If I can get any kind of reference on it, I can try to track it down.
>
> BTW, I received the 2005 Corvette injectors that are supposed to have
> a hotter spark. They can use the same connector the LS1 trucks use.
> The inside of the connector cavity is different, so I'm not sure the
> connector used on the Corvette is exaclty the same. I'll have to check
> that out.
>
> Bob W.
>
>
>
>
> On Mon, 5 Dec 2005 08:24:15 +1000
> "george lendich" <lendich@optusnet.com.au> wrote:
>
> > Thanks Bob,
> > I realised my mistake just after I hit the send button.
> > Do you think you could track it down from your sources. The RX8 fitting
is,
> > Kelly advises, the same as the 1999-2002 Mazda Protege and the1993-95
RX7.
> > I would say that a lot of people might use the RX8 timing wheel, if they
> > could source everything.
> > George ( down under)
> >
> > > Hi George,
> > >
> > > I think you meant Bob White so I'll respond. :) I don't recognize the
> > > connector from the picture.
> > >
> > > Bob W.
> > >
> > >
> > > On Sun, 4 Dec 2005 17:48:42 +1000
> > > "george lendich" <lendich@optusnet.com.au> wrote:
> > >
> > > > Kelly,
> > > > I was hoping to buy one ( connector) off the shelf, without having
to
> > chase around wreckers for one.
> > > > I wonder if Bill White can source these - Bill are you there?
> > > > George ( down under)
> > > > George,
> > > > Do you mean the 2 pin connector of the sensor........That is
the
> > > > connector (along with a pigtail of wire for splicing) from the
donor
> > > > auto that I suggested.......
> > > >
> > > > --
> > > > Kelly Troyer
> > > > Dyke Delta/13B/RD1C/EC2
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > -------------- Original message from "george lendich"
> > <lendich@optusnet.com.au>: --------------
> > > >
> > > >
> > > > Kelly,
> > > > What I really need is the connector for the 2 pin plug - any
ideas.
> > > > George ( down under)
> > > > Ken,
> > > > This is what you are looking for !!
> > > > --
> > > > Kelly Troyer
> > > > Dyke Delta/13B/RD1C/EC2
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > -------------- Original message from keltro@att.net (Kelly
> > Troyer): --------------
> > > >
> > > >
> > > > Ken,
> > > > Hit the junkyards........1999-2002 Mazda Protege "Camshaft
> > Sensor"
> > > > is the same part number as the 1993-95 RX7 eccentric shaft
> > sensor....
> > > > Rock Auto price had best price of $81.00 that I
found.......Get
> > the
> > > > connector from the donor car harness with the sensor !!
> > > > --
> > > > Kelly Troyer
> > > > Dyke Delta/13B/RD1C/EC2
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > -------------- Original message from
> > kenpowell@comcast.net: --------------
> > > >
> > > >
> > > > Kelly,
> > > > I need one of these too plus the pickup. I'll be really
> > interested in what you find.
> > > >
> > > > Ken Powell
> > > > Bryant, Arkansas
> > > > 501-847-4721
> > > > C150 / RV-4 under construction
> > > >
> > > >
> > > >
> > > >
> > >
> >
> --------------------------------------------------------------------------
> > > >
> > > >
> > > > --
> > > > Homepage: http://www.flyrotary.com/
> > > > Archive and UnSub:
> > http://mail.lancaironline.net/lists/flyrotary/
> > > >
> > >
> > >
> > > --
> > > http://www.bob-white.com
> > > N93BD - Rotary Powered BD-4 (Projected engine start - maybe next week)
> > > Custom Cables for your rotary installation -
> > > http://www.roblinphoto.com/shop/
> > >
> > > --
> > > Homepage: http://www.flyrotary.com/
> > > Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
> > >
> >
> >
> >
> > --
> > Homepage: http://www.flyrotary.com/
> > Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
>
>
> --
> http://www.bob-white.com
> N93BD - Rotary Powered BD-4 (Projected engine start - maybe next week)
> Custom Cables for your rotary installation -
> http://www.roblinphoto.com/shop/
>
> --
> Homepage: http://www.flyrotary.com/
> Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
>
|
|