X-Virus-Scanned: clean according to Sophos on Logan.com
Return-Path: <lendich@optusnet.com.au>
Received: from mail23.syd.optusnet.com.au ([211.29.133.164] verified)
  by logan.com (CommuniGate Pro SMTP 5.0.3)
  with ESMTPS id 863044 for flyrotary@lancaironline.net; Sun, 04 Dec 2005 17:25:09 -0500
Received-SPF: none
 receiver=logan.com; client-ip=211.29.133.164; envelope-from=lendich@optusnet.com.au
Received: from george (d58-104-136-67.dsl.nsw.optusnet.com.au [58.104.136.67])
	by mail23.syd.optusnet.com.au (8.12.11/8.12.11) with SMTP id jB4MOEeC012647
	for <flyrotary@lancaironline.net>; Mon, 5 Dec 2005 09:24:17 +1100
Message-ID: <003f01c5f921$76eda550$4388683a@george>
From: "george lendich" <lendich@optusnet.com.au>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-862842@logan.com>
Subject: Re: [FlyRotary] Re: Eccentric Shaft Position Sensor
Date: Mon, 5 Dec 2005 08:24:15 +1000
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 6.00.2800.1106
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106

Thanks Bob,
I realised my mistake just after I hit the send button.
Do you think you could track it down from your sources. The RX8 fitting is,
Kelly advises, the same as the 1999-2002 Mazda Protege and the1993-95 RX7.
I would say that a lot of people might use the RX8 timing wheel, if they
could source everything.
George ( down under)

> Hi George,
>
> I think you meant Bob White so I'll respond. :)  I don't recognize the
> connector from the picture.
>
> Bob W.
>
>
> On Sun, 4 Dec 2005 17:48:42 +1000
> "george lendich" <lendich@optusnet.com.au> wrote:
>
> > Kelly,
> > I was hoping to buy one ( connector) off the shelf, without having to
chase around wreckers for one.
> > I wonder if Bill White can source these - Bill are you there?
> > George ( down under)
> >   George,
> >       Do you mean the 2 pin connector of the sensor........That is the
> >   connector (along with a pigtail of wire for splicing) from the donor
> >   auto that I suggested.......
> >
> >   --
> >   Kelly Troyer
> >   Dyke Delta/13B/RD1C/EC2
> >
> >
> >
> >
> >
> >
> >     -------------- Original message from "george lendich"
<lendich@optusnet.com.au>: --------------
> >
> >
> >      Kelly,
> >     What I really need is the connector for the 2 pin plug - any ideas.
> >     George ( down under)
> >       Ken,
> >       This is what you are looking for !!
> >       --
> >       Kelly Troyer
> >       Dyke Delta/13B/RD1C/EC2
> >
> >
> >
> >
> >
> >
> >         -------------- Original message from keltro@att.net (Kelly
Troyer): --------------
> >
> >
> >         Ken,
> >           Hit the junkyards........1999-2002 Mazda Protege "Camshaft
Sensor"
> >         is the same part number as the 1993-95 RX7 eccentric shaft
sensor....
> >          Rock Auto price had best price of $81.00 that I found.......Get
the
> >         connector from the donor car harness with the sensor !!
> >         --
> >         Kelly Troyer
> >         Dyke Delta/13B/RD1C/EC2
> >
> >
> >
> >
> >
> >
> >           -------------- Original message from
kenpowell@comcast.net: --------------
> >
> >
> >           Kelly,
> >           I need one of these too plus the pickup.  I'll be really
interested in what you find.
> >
> >           Ken Powell
> >           Bryant, Arkansas
> >           501-847-4721
> >           C150 / RV-4 under construction
> >
> >
> >
> >
>
> --------------------------------------------------------------------------
> >
> >
> >       --
> >       Homepage:  http://www.flyrotary.com/
> >       Archive and UnSub:
http://mail.lancaironline.net/lists/flyrotary/
> >
>
>
> --
> http://www.bob-white.com
> N93BD - Rotary Powered BD-4 (Projected engine start - maybe next week)
> Custom Cables for your rotary installation -
> http://www.roblinphoto.com/shop/
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/
>