X-Virus-Scanned: clean according to Sophos on Logan.com
Return-Path: <rlwhite@comcast.net>
Received: from rwcrmhc12.comcast.net ([216.148.227.85] verified)
  by logan.com (CommuniGate Pro SMTP 5.0.3)
  with ESMTP id 862841 for flyrotary@lancaironline.net; Sun, 04 Dec 2005 11:36:56 -0500
Received-SPF: none
 receiver=logan.com; client-ip=216.148.227.85; envelope-from=rlwhite@comcast.net
Received: from Quail (bgp01386375bgs.brodwy01.nm.comcast.net[68.35.160.229])
          by comcast.net (rwcrmhc12) with SMTP
          id <20051204163601014005tvi1e>; Sun, 4 Dec 2005 16:36:11 +0000
Date: Sun, 4 Dec 2005 09:36:09 -0700
From: Bob White <rlwhite@comcast.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: Eccentric Shaft Position Sensor
Message-Id: <20051204093609.29094a3c.rlwhite@comcast.net>
In-Reply-To: <list-862632@logan.com>
References: <list-862632@logan.com>
X-Mailer: Sylpheed version 2.1.8 (GTK+ 2.8.3; i686-pc-linux-gnu)
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

Hi George,

I think you meant Bob White so I'll respond. :)  I don't recognize the
connector from the picture.

Bob W.


On Sun, 4 Dec 2005 17:48:42 +1000
"george lendich" <lendich@optusnet.com.au> wrote:

> Kelly,
> I was hoping to buy one ( connector) off the shelf, without having to chase around wreckers for one.
> I wonder if Bill White can source these - Bill are you there?
> George ( down under)
>   George,
>       Do you mean the 2 pin connector of the sensor........That is the
>   connector (along with a pigtail of wire for splicing) from the donor
>   auto that I suggested....... 
> 
>   --
>   Kelly Troyer 
>   Dyke Delta/13B/RD1C/EC2 
> 
> 
> 
> 
> 
> 
>     -------------- Original message from "george lendich" <lendich@optusnet.com.au>: -------------- 
> 
> 
>      Kelly,
>     What I really need is the connector for the 2 pin plug - any ideas.
>     George ( down under)
>       Ken,
>       This is what you are looking for !!
>       --
>       Kelly Troyer 
>       Dyke Delta/13B/RD1C/EC2 
> 
> 
> 
> 
> 
> 
>         -------------- Original message from keltro@att.net (Kelly Troyer): -------------- 
> 
> 
>         Ken,
>           Hit the junkyards........1999-2002 Mazda Protege "Camshaft Sensor"
>         is the same part number as the 1993-95 RX7 eccentric shaft sensor....
>          Rock Auto price had best price of $81.00 that I found.......Get the 
>         connector from the donor car harness with the sensor !!
>         --
>         Kelly Troyer 
>         Dyke Delta/13B/RD1C/EC2 
> 
> 
> 
> 
> 
> 
>           -------------- Original message from kenpowell@comcast.net: -------------- 
> 
> 
>           Kelly,
>           I need one of these too plus the pickup.  I'll be really interested in what you find.
> 
>           Ken Powell 
>           Bryant, Arkansas 
>           501-847-4721 
>           C150 / RV-4 under construction
> 
> 
> 
> 
> --------------------------------------------------------------------------
> 
> 
>       --
>       Homepage:  http://www.flyrotary.com/
>       Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/
> 


-- 
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (Projected engine start - maybe next week)
Custom Cables for your rotary installation -
http://www.roblinphoto.com/shop/