Received-SPF: none
 receiver=logan.com; client-ip=209.86.89.67; envelope-from=jerryhey@earthlink.net
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
  s=dk20050327; d=earthlink.net;
  b=ILXQ1GYuENwVAHcuobqgFCKrH3NlSE6CIeXCLFiuprscyeWns1C0l9lY4N9undNL;
  h=Received:Mime-Version:In-Reply-To:References:Content-Type:Message-Id:Content-Transfer-Encoding:From:Subject:Date:To:X-Mailer:X-ELNK-Trace:X-Originating-IP;
Mime-Version: 1.0 (Apple Message framework v734)
In-Reply-To: <list-780507@logan.com>
References: <list-780507@logan.com>
Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed
Message-Id: <9F2E6FDA-D9BE-4D51-BA08-6D518C0648BC@earthlink.net>
Content-Transfer-Encoding: 7bit
From: Jerry Hey <jerryhey@earthlink.net>
Subject: Re: [FlyRotary] Dyna Focal Drawings
Date: Sun, 23 Oct 2005 10:11:47 -0500
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>

Kelly,  The drawings I  have were originally made in conjunction with  
the Tailwind engine mount.  The dynofocal ring however is the same  
regardless of the aircraft, of course. The drawings are in auto cad  
and I don't have the program.  I can import them into Vector Works on  
my Mac  but run into problems of scaling the text. At a printable j- 
peg size, the text(dimensions)  is too small to read. Maybe Bob has  
the ability to resolve this issue.  BTW I have an old Lyc case that  
makes it very easy to build a dynofocal ring but I would not bother  
as it is a lot of work and  ACS sells them for $136.00.  Jerry


On Oct 22, 2005, at 8:32 PM, Kelly Troyer wrote:

> Jerry and Bob,
>       Any chance of sending this as a Jpg for those of us who  
> struggle just
> to turn our conputers on ??
> --
> Kelly Troyer
> Dyke Delta/13B/RD1C/EC2
>
>
>
>
> -------------- Original message from Bob White <bob@bob-white.com>:  
> --------------
>
>
> > Hi Jerry,
> >
> > When you unzip the file, you get two directories. One directory is
> > __MACOSX, and the other has the same names as the dxf file. The  
> dxf zip
> > file is in that directory. I would just send the file, and not  
> put in
> > all those spaces in the name either. :)
> >
> > Actually OSX is based on one of the BSD flavors. which is a  
> different
> > Unix clone. There are some licensing problems with Linux for  
> commercial
> > companies. Linux and BSD are very similar and most software that  
> runs
> > on one will run on the other. OSX has a bunch of user interface  
> built
> > on top so that it doesn't look like BSD or Linux. I type a lot of
> > stuff at the command line. On MAC OS9 and earlier, that wasn't even
> > possible. That was the hardest part of using a MAC for me. I quit
> > using MACs just before OSX came out. (It was a work thing.)
> >
> > Bob W.
> >
> >
> > On Sat, 22 Oct 2005 15:10:23 -0500
> > Jerry Hey wrote:
> >
> > > Thanks, what does it mean, "a directory or two down?" Us Mac guys
> > > don't speak that language. BTW, arn't you using Lennox? That is
> > > quite similar to the Mac OS, both being Unix based. Jerry
> > >
> > >
> > > On Oct 22, 2005, at 2:20 PM, Bob White wrote:
> > >
> > > > Hi Jerry,
> > > >
> > > > It came thru to the list although it's a directory or two  
> down, and
> > > > includes some MAC stuff. :) I unzipped it and opened it with  
> VariCAD.
> > > > It seems to be OK.
> > > >
> > > > Bob W.
> > > >
> > > >
> > > > On Sat, 22 Oct 2005 13:39:19 -0500
> > > > Jerry Hey wrote:
> > > >
> > > >
> > > >> Leon, that drawing was bounced. Symantic Mail Security  
> called it a
> > > >> "prohibited file." Maybe I could send it to you direct.  
> Contact me
> > > >> at jerryhey@earthlink.net jerry
> > > >>
> > > >>
> > > >> On Oct 22, 2005, at 1:28 PM, Jerry Hey wrote:
> > > >>
> > > >>
> > > >>> Leon, I use a CAD program called Vector Works so I have  
> exported
> > > >>> from it to DXF. I hope it works for you. If not I can probably
> > > >>> come up with a jpg. Jerry
> > > >>> <0320 engine mt and gear mt.-dxf>
> > > >>>
> > > >>>
> > > >>>
> > > >>> On Oct 21, 2005, at 7:05 PM, Leon Promet wrote:
> > > >>>
> > > >>>
> > > >>>> Hi Guys,
> > > >>>>
> > > >>>> Does anyone out there have the dimensions for a DynaFocal  
> mount
> > > >>>> please?? A CAD drawing WOULD be real nice, (either dxf or dwg
> > > >>>> format would be just ducky), but even a hand sketch with the
> > > >>>> dimensions would be just super.
> > > >>>>
> > > >>>> Thanks in advance,
> > > >>>>
> > > >>>> Leon
>
>