Received-SPF: none
 receiver=logan.com; client-ip=67.15.58.72; envelope-from=bob@bob-white.com
Date: Sat, 22 Oct 2005 15:03:53 -0600
From: Bob White <bob@bob-white.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: OT Attachments and MAC, was: Dyna Focal Drawings
Message-Id: <20051022150353.64bac005.bob@bob-white.com>
In-Reply-To: <list-780240@logan.com>
References: <list-780240@logan.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

Hi Jerry,

When you unzip the file, you get two directories.  One directory is
__MACOSX, and the other has the same names as the dxf file.  The dxf zip
file is in that directory.  I would just send the file, and not put in
all those spaces in the name either. :)

Actually OSX is based on one of the BSD flavors. which is a different
Unix clone.  There are some licensing problems with Linux for commercial
companies.  Linux and BSD are very similar and most software that runs
on one will run on the other.  OSX has a bunch of user interface built
on top so that it doesn't look like BSD or Linux.  I type a lot of
stuff at the command line.  On MAC OS9 and earlier, that wasn't even
possible.  That was the hardest part of using a MAC for me.  I quit
using MACs just before OSX came out.  (It was a work thing.) 

Bob W.


On Sat, 22 Oct 2005 15:10:23 -0500
Jerry Hey <jerryhey@earthlink.net> wrote:

> Thanks,  what does it mean, "a directory or two down?"  Us Mac guys  
> don't speak that language.  BTW, arn't  you using Lennox?  That is  
> quite similar to the Mac OS, both being Unix based.  Jerry
> 
> 
> On Oct 22, 2005, at 2:20 PM, Bob White wrote:
> 
> > Hi Jerry,
> >
> > It came thru to the list although it's a directory or two down, and
> > includes some MAC stuff. :)  I unzipped it and opened it with VariCAD.
> > It seems to be OK.
> >
> > Bob W.
> >
> >
> > On Sat, 22 Oct 2005 13:39:19 -0500
> > Jerry Hey <jerryhey@earthlink.net> wrote:
> >
> >
> >> Leon,  that drawing was bounced.  Symantic Mail Security called it a
> >> "prohibited file."  Maybe I could send it to you direct.  Contact me
> >> at jerryhey@earthlink.net  jerry
> >>
> >>
> >> On Oct 22, 2005, at 1:28 PM, Jerry Hey wrote:
> >>
> >>
> >>> Leon,  I use a CAD program called Vector Works so I have exported
> >>> from it to DXF.  I hope it works for you.  If not I can probably
> >>> come up with a jpg.    Jerry
> >>> <0320 engine mt and gear mt.-dxf>
> >>>
> >>>
> >>>
> >>> On Oct 21, 2005, at 7:05 PM, Leon Promet wrote:
> >>>
> >>>
> >>>> Hi Guys,
> >>>>
> >>>> Does anyone out there have the dimensions for a DynaFocal mount
> >>>> please??  A CAD drawing WOULD be real nice,  (either dxf or dwg
> >>>> format would be just ducky),  but even a hand sketch with the
> >>>> dimensions would be just super.
> >>>>
> >>>> Thanks in advance,
> >>>>
> >>>> Leon
> >>>>
> >>>> P.S.
> >>>>
> >>>> BTW,  the WunLunga RX8 in Humphrey has now passed 6,000 km.
> >>>> Hasn't missed a beat.  Runs like a Swiss Watch,  starts first hit,
> >>>> and revs to 9,500!
> >>>>
> >>>>
> >>>
> >>>
> >>
> >>
> >>
> >
> >
> > -- 
> > http://www.bob-white.com
> > N93BD - Rotary Powered BD-4 (projected engine start in November)
> > Custom Cables for your rotary installation -
> > http://www.roblinphoto.com/shop/
> >
> > --
> > Homepage:  http://www.flyrotary.com/
> > Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/
> >
> 
> 
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net/lists/flyrotary/
> 
> 


-- 
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (projected engine start in November)
Custom Cables for your rotary installation -
http://www.roblinphoto.com/shop/