|
Ernest'
My current plan is to mount the two 9.5" x 13" evaporators between the second and third
ribs inboard from each side of the center section with inlets on the leading edge and oulets
on top of the airfoil from 50 to 70 % of chord from leading edge........All subject to change
of course !!
--
Kelly Troyer
Dyke Delta/13B/RD1C/EC2
-------------- Original message from Ernest Christley <echristley@nc.rr.com>: --------------
> Kelly Troyer wrote:
>
> > Thomas,
> > I am using report 743 to guide me with the installation of radiators
> > in the wing strakes of my Dyke Delta.....
> > --
> > Kelly Troyer
> > Dyke Delta/13B/RD1C/EC2
>
>
> Do you have any preliminary designs, Kelly. I gone so far as making a
> mockup of a duct from 1/4" foam taped together that would fit behind the
> wheel well. I think it can be made to work aerodynamically, possibly
> with the addition of an updraft scoop, but I had it pointed out to me
> that putting the radiator right behind the wheel puts it in grave danger
> of being taken out by a thrown pebble (there we go with all those
> compromises again 8*). Larry LaBeau says that he hasn't seen much along
> the lines of rock damage behind his main wheels, but it's still enough
> of a concern for me to consider a different design.
>
> --
> ,|"|"|, |
> ----===<{{(oQo)}}>===---- Dyke Delta |
> o| d |o www.ernest.isa-geek.org |
>
> --
> Homepage: http://www.flyrotary.com/
> Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/
|