Mailing List flyrotary@lancaironline.net Message #26656
From: Bobby J. Hughes <bhughes@qnsi.net>
Subject: RE: RD-C Drive Adapter Plate for Renesis
Date: Sat, 17 Sep 2005 18:21:25 -0500
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Cc: Laura Crook <laura_crook@hotmail.com>
 Message Header

Undecoded Message
Please disregard. I have been educated by Mark S. I was "expecting" the damper to set flush with the seal.
 
Bobby
 
 

From: Bobby J. Hughes
Sent: Sat 9/17/2005 5:31 PM
To: Rotary motors in aircraft
Subject: RD-C Drive Adapter Plate for Renesis

One the first test fit of the C Drive to my Renesis I have a .130 space between the adapter plate o-ring seal and the damper plate face. I have checked the damper three time and the washer configuration is correct. Any one else experience this problem.
 
Thanks,
 
Bobby
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster