X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from [199.185.220.220] (HELO priv-edtnes56.telusplanet.net) by logan.com (CommuniGate Pro SMTP 5.0c2) with ESMTP id 720018 for flyrotary@lancaironline.net; Tue, 13 Sep 2005 03:04:57 -0400 Received-SPF: pass receiver=logan.com; client-ip=199.185.220.220; envelope-from=haywire@telus.net Received: from Endurance ([154.20.245.217]) by priv-edtnes56.telusplanet.net (InterMail vM.6.01.04.04 201-2131-118-104-20050224) with SMTP id <20050913070407.WEPU13122.priv-edtnes56.telusplanet.net@Endurance> for ; Tue, 13 Sep 2005 01:04:07 -0600 From: "Todd Bartrim" To: "'Rotary motors in aircraft'" Subject: RE: [FlyRotary] Re: IVO Brush Holder Date: Tue, 13 Sep 2005 00:04:00 -0700 Message-ID: <000001c5b831$51bc4b50$0101a8c0@Endurance> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2910.0) Importance: Normal In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 Thread a nut onto the rod approx. 1" then pass rod through hole drilled into stiffener web then thread on another nut. Same procedure at the other end for the brush holder, then adjust nut positions until precise alignment is reached and tighten nuts. I used nylock nuts and they've never moved out of adjustment but you could loctite if you wish. I'd try to get out and get a pic but this week is very busy for me. These last few weeks I've been welding together 36' long by 21' high wall sections using 8" & 6" 'H' beam )for my new shop) and today after work we started to raise them using my neighbours 20 ton excavator as a crane, so now I've got allot of welding to do as each section goes up. So the earliest I could head out to the airport to take a pic would be the weekend. Todd Bartrim RV9Endurance 13B Turbo Rotary C-FSTB http://www3.telus.net/haywire/RV-9/C-FSTB.htm "The world will always have a place for those that bring hard work and determination to the things they do." ~ -----Original Message----- ~ From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]On ~ Behalf Of John Slade ~ Sent: Monday, September 12, 2005 1:19 PM ~ To: Rotary motors in aircraft ~ Subject: [FlyRotary] Re: IVO Brush Holder ~ ~ ~ > Ok, It's simply a piece of redi-rod (threaded rod) bent to the ~ How did you attach it to the stiffener? ~ ~ >biting my tongue to keep from adding a comment about women... ~ There's a joke there somewhere :) ~ ~ John ~ ~ ~ ~ -- ~ Homepage: http://www.flyrotary.com/ ~ Archive and UnSub: http://mail.lancaironline.net/lists/flyrotary/ ~