> From: Al Gietzen [mailto:ALVentures@cox.net]
> Sent: Tuesday, August 12, 2003 8:33 AM
> To: ACRE NL
> Subject: Repositioning the Starter
>
> For those using Tracy's re-drive, and find a problem with the 6:00
> starter position, here are some pics of another place to put using the
> existing mounting bolts - about a 9:30 position.
>
> The 6:00 position hit a cross member on my mount; and I wanted to get it
> away from my exhaust going by on the other side.  Very carefully found
> the new center point for the starter shaft; machined a new mount hole;
> drilled one new bolt hole in the starter mount flange to get the right
> bolt spacing; cut off the bottom of the adapter plate.
>
> Al
>
Nice job Al.  Reduces the weight and I give you extra points for making the
mounting bolts serve more than one purpose.

BTW, how did switching the primary & secondary injectors work out for easing
the step from 2 to 4 injectors at stagging point?

Tracy