-----Original Message-----
From: Al Gietzen [mailto:ALVentures@cox.net]
Sent: Tuesday, August 12, 2003 8:33 AM
To: ACRE NL
Subject: Repositioning the Starter

For those using Tracy's re-drive, and find a problem with the 6:00
starter position, here are some pics of another place to put using the
existing mounting bolts - about a 9:30 position.

The 6:00 position hit a cross member on my mount; and I wanted to get it
away from my exhaust going by on the other side.  Very carefully found
the new center point for the starter shaft; machined a new mount hole;
drilled one new bolt hole in the starter mount flange to get the right
bolt spacing; cut off the bottom of the adapter plate.

Al


>>  Homepage:  http://www.flyrotary.com/
>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html