X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from [129.116.87.143] (HELO MAIL01.austin.utexas.edu) by logan.com (CommuniGate Pro SMTP 4.3.4) with ESMTP id 988726 for flyrotary@lancaironline.net; Wed, 08 Jun 2005 14:50:26 -0400 Received-SPF: none receiver=logan.com; client-ip=129.116.87.143; envelope-from=mark.steitle@austin.utexas.edu X-MimeOLE: Produced By Microsoft Exchange V6.5.7226.0 Content-class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Subject: RE: [FlyRotary] Re: New kid on the block. Date: Wed, 8 Jun 2005 13:49:40 -0500 Message-ID: <87DBA06C9A5CB84B80439BA09D86E69E016C19CF@MAIL01.austin.utexas.edu> X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: [FlyRotary] Re: New kid on the block. Thread-Index: AcVsVx4ZqqlLa/+EQ2KlFFXU4ohCFQAAuI1g From: "Mark R Steitle" To: "Rotary motors in aircraft" Jim, I see that you're in New Braunsfels. I'm just into Hays Co. off Hwy 290W. There are a few of us "rotorheads" in the Austin area. You're welcome to come out and look at what I've been working on for the last few years. I've got a hangar lined up and be moving my project out to Lockhart in the next month or so. You can contact me off list at the following email address, mark.steitle "at" Austin.utexas.edu. Mark S. Lancair ES - N/A 20B =20 -----Original Message----- From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Bob White Sent: Wednesday, June 08, 2005 1:22 PM To: Rotary motors in aircraft Subject: [FlyRotary] Re: New kid on the block. Welcome Jim, You've found the right place for rotary info. Of course we're both on the other list (No not THAT other list) for BD-4 info. Bob W. (You'll figure out what "the other list" usually means around here soon enough.) On Wed, 8 Jun 2005 06:48:27 -0500 "James Calamon" wrote: > Hello everyone, I'm the new kid on the block and seriously looking at rotary power for my BD-4 project (check the link below). I need some help in getting started on information that I should bone up on before jumping into the morass of rotary engine building. I ordered the book on rotary conversions by Tracey Crook as a start, but would like input from experienced builders as to other recommended reading and reference material (i.e. books and web sights).=20 >=20 > Best Regards >=20 > Jim Calamon > N5658Z New Braunfles, Texas (BAZ) > "People may fail many times, but they become failures only when they begin to blame someone else" - Unknown >=20 > http://gvtc.com/~n5658z/ >=20 >=20 >=20 --=20 http://www.bob-white.com N93BD - Rotary Powered BD-4 (real soon) Prewired EC2 Cables - http://www.roblin-photo.com/cable/ >> Homepage: http://www.flyrotary.com/ >> Archive: http://lancaironline.net/lists/flyrotary/List.html