Received-SPF: none
 receiver=logan.com; client-ip=66.98.204.64; envelope-from=bob@bob-white.com
Date: Wed, 8 Jun 2005 12:22:15 -0600
From: Bob White <bob@bob-white.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] New kid on the block.
Message-Id: <20050608122215.716cc039.bob@bob-white.com>
In-Reply-To: <list-988334@logan.com>
References: <list-988334@logan.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

Welcome Jim,

You've found the right place for rotary info.  Of course we're both on
the other list (No not THAT other list) for BD-4 info.

Bob W.  (You'll figure out what "the other list" usually means around
here soon enough.)

On Wed, 8 Jun 2005 06:48:27 -0500
"James Calamon" <n5658z@gvtc.com> wrote:

> Hello everyone, I'm the new kid on the block and seriously looking at rotary power for my BD-4 project (check the link below). I need some help in getting started on information that I should bone up on before jumping into the morass of rotary engine building. I ordered the book on rotary conversions by Tracey Crook as a start, but would like input from experienced builders as to other recommended reading and reference material (i.e. books and web sights). 
> 
> Best Regards
> 
> Jim Calamon
> N5658Z New Braunfles, Texas (BAZ)
> "People may fail many times, but they become failures only when they begin to blame someone else" - Unknown
> 
> http://gvtc.com/~n5658z/
> 
> 
> 


-- 
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (real soon)
Prewired EC2 Cables - http://www.roblin-photo.com/cable/