Received-SPF: none
 receiver=logan.com; client-ip=211.29.132.192; envelope-from=lendich@optusnet.com.au
Message-ID: <003e01c56628$eca94b50$2519ecdc@george>
From: "George Lendich" <lendich@optusnet.com.au>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-970325@logan.com>
Subject: Re: [FlyRotary] Re: Renesis oil pan
Date: Wed, 1 Jun 2005 07:37:19 +1000
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Jerry,
If it were me, and I was making a oil pan from scratch, I would use the
largest volume either the RX 8 six port or 13B.
If I wanted to use 'off the shelf', I would use the largest volume that
would fit.
George ( down under)

> Jerry,
>
> I would feel better with the 6 port oil volume.
>
> Bobby
>
>
>
> -----Original Message-----
> From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
> Behalf Of Jerry Hey
> Sent: Tuesday, May 31, 2005 8:45 AM
> To: Rotary motors in aircraft
> Subject: [FlyRotary] Renesis oil pan
>
> Can anyone tell me if the Renesis pick up tube bolts up to the oil pump
> the same as the 13 B?   I am trying to determine if I can use the  13 B
> pick up tube in a custom oil pan for a Renesis.   If not, the Renesis
> pick up tube will  have to be  modified.
> FYI,The 13 B oil pan is two inches deeper than the Renesis pan and holds
> 158 oz.  The Renesis oil pan holds 96 oz.
>
>    At oil change how much oil does the Renesis take?   The 13B takes 5
> qts with filter.     Thanks,   Jerry
>
>
>
>
>
>
> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>
>
> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>
>