Received-SPF: none
 receiver=logan.com; client-ip=66.98.204.64; envelope-from=bob@bob-white.com
Date: Mon, 30 May 2005 17:18:59 -0600
From: Bob White <bob@bob-white.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: EC2 Cables
Message-Id: <20050530171859.7215aa42.bob@bob-white.com>
In-Reply-To: <list-968321@logan.com>
References: <list-968321@logan.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit


On Mon, 30 May 2005 19:03:29 -0400
Bulent Aliev <atlasyts@bellsouth.net> wrote:

> On 5/29/05 11:54 PM, "Bob White" <bob@bob-white.com> wrote:
> 
> > I've finished the prototype EC2 cable, and I have a prototype web site
> > set up.  Here's a photo.  The web site still needs some work, but if
> > you want to take a look, it's at:
> > http://www.roblin-photo.com/cable/cable.html
> > 
> > There is a spreadsheet to adjust the price depending on how much wire
> > you need to use.
> > 
> > In case there is some detail in the photos of the connectors that will
> > give me away, I want to mention up front that these are not the
> > connectors I will be using in the production cables.  The good
> > connectors are on the way.  these were some cheap substitutes I got at
> > the local electronics store.
> > 
> > I want to thank everyone for their support and encouragement on this
> > project.  Any comments would be welcomed.  I'm pretty much set up to
> > make the cables, but I haven't received all the parts yet.  I should be
> > able to start late next week.
> > 
> > 
> > Bob W.
> 
> Nice work Bob. Knowing how much work and trouble this saves, I recommend it
> for anybody getting ready to install the electronics from Tracy.
> Buly
> 

Thanks Buly.

Bob W.


-- 
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (real soon)