Received-SPF: pass
 receiver=logan.com; client-ip=205.152.59.68; envelope-from=atlasyts@bellsouth.net
User-Agent: Microsoft-Entourage/11.1.0.040913
Date: Mon, 30 May 2005 19:03:29 -0400
Subject: Re: [FlyRotary] EC2 Cables
From: Bulent Aliev <atlasyts@bellsouth.net>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Message-ID: <BEC11401.22EA%atlasyts@bellsouth.net>
In-Reply-To: <list-967692@logan.com>
Mime-version: 1.0
Content-type: text/plain;
	charset="US-ASCII"
Content-transfer-encoding: 7bit

On 5/29/05 11:54 PM, "Bob White" <bob@bob-white.com> wrote:

> I've finished the prototype EC2 cable, and I have a prototype web site
> set up.  Here's a photo.  The web site still needs some work, but if
> you want to take a look, it's at:
> http://www.roblin-photo.com/cable/cable.html
> 
> There is a spreadsheet to adjust the price depending on how much wire
> you need to use.
> 
> In case there is some detail in the photos of the connectors that will
> give me away, I want to mention up front that these are not the
> connectors I will be using in the production cables.  The good
> connectors are on the way.  these were some cheap substitutes I got at
> the local electronics store.
> 
> I want to thank everyone for their support and encouragement on this
> project.  Any comments would be welcomed.  I'm pretty much set up to
> make the cables, but I haven't received all the parts yet.  I should be
> able to start late next week.
> 
> 
> Bob W.

Nice work Bob. Knowing how much work and trouble this saves, I recommend it
for anybody getting ready to install the electronics from Tracy.
Buly