Thanks Tracy,

For the amount of time I put into the first one, it would be illegal
for me to hire someone to do it. :)  I expect to get a lot more
proficent as I get a production system set up.

Bob W.



On Mon, 30 May 2005 14:20:39 -0400
"Tracy Crook" <lors01@msn.com> wrote:

> Nice looking work and a hell of a good deal Bob.  Even though I'm completely familiar with doing the job, I'd have Bob do it for me at that price.
>
> Tracy
>   ----- Original Message -----
>   From: Bob White<mailto:bob@bob-white.com>
>   To: Rotary motors in aircraft<mailto:flyrotary@lancaironline.net>
>   Sent: Sunday, May 29, 2005 11:54 PM
>   Subject: [FlyRotary] EC2 Cables
>
>
>   I've finished the prototype EC2 cable, and I have a prototype web site
>   set up.  Here's a photo.  The web site still needs some work, but if
>   you want to take a look, it's at:
>   http://www.roblin-photo.com/cable/cable.html<http://www.roblin-photo.com/cable/cable.html>
>
>   There is a spreadsheet to adjust the price depending on how much wire
>   you need to use.
>
>   In case there is some detail in the photos of the connectors that will
>   give me away, I want to mention up front that these are not the
>   connectors I will be using in the production cables.  The good
>   connectors are on the way.  these were some cheap substitutes I got at
>   the local electronics store.
>
>   I want to thank everyone for their support and encouragement on this
>   project.  Any comments would be welcomed.  I'm pretty much set up to
>   make the cables, but I haven't received all the parts yet.  I should be
>   able to start late next week.
>
>
>   Bob W.
>
>   --
>   http://www.bob-white.com<http://www.bob-white.com/>
>   N93BD - Rotary Powered BD-4 (real soon)
>


--
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (real soon)