Hi George,

How about continuity tester?  :)

I just want everyone to take one final look to be sure the wiring is
correct, as you would if you had made the cable yourself.

Bob W.

On Mon, 30 May 2005 15:30:12 +1000
"George Lendich" <lendich@optusnet.com.au> wrote:

> Bob,
> That sure simplifies it - I think!
> Did I say I was electronically challenged - what's an ohmmeter?
> George ( down under)
>
> > I've finished the prototype EC2 cable, and I have a prototype web site
> > set up.  Here's a photo.  The web site still needs some work, but if
> > you want to take a look, it's at:
> > http://www.roblin-photo.com/cable/cable.html
> >
> > There is a spreadsheet to adjust the price depending on how much wire
> > you need to use.
> >
> > In case there is some detail in the photos of the connectors that will
> > give me away, I want to mention up front that these are not the
> > connectors I will be using in the production cables.  The good
> > connectors are on the way.  these were some cheap substitutes I got at
> > the local electronics store.
> >
> > I want to thank everyone for their support and encouragement on this
> > project.  Any comments would be welcomed.  I'm pretty much set up to
> > make the cables, but I haven't received all the parts yet.  I should be
> > able to start late next week.
> >
> >
> > Bob W.
> >
> > --
> > http://www.bob-white.com
> > N93BD - Rotary Powered BD-4 (real soon)
> >
>
>
> ----------------------------------------------------------------------------
> ----
>
>
> > >>  Homepage:  http://www.flyrotary.com/
> > >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
> >
>
>
>
> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>
>


--
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (real soon)