Received-SPF: none
 receiver=logan.com; client-ip=211.29.133.167; envelope-from=lendich@optusnet.com.au
Message-ID: <006001c564d8$a79d61f0$45b61fd3@george>
From: "George Lendich" <lendich@optusnet.com.au>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-967692@logan.com>
Subject: Re: [FlyRotary] EC2 Cables
Date: Mon, 30 May 2005 15:30:12 +1000
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Bob,
That sure simplifies it - I think!
Did I say I was electronically challenged - what's an ohmmeter?
George ( down under)

> I've finished the prototype EC2 cable, and I have a prototype web site
> set up.  Here's a photo.  The web site still needs some work, but if
> you want to take a look, it's at:
> http://www.roblin-photo.com/cable/cable.html
>
> There is a spreadsheet to adjust the price depending on how much wire
> you need to use.
>
> In case there is some detail in the photos of the connectors that will
> give me away, I want to mention up front that these are not the
> connectors I will be using in the production cables.  The good
> connectors are on the way.  these were some cheap substitutes I got at
> the local electronics store.
>
> I want to thank everyone for their support and encouragement on this
> project.  Any comments would be welcomed.  I'm pretty much set up to
> make the cables, but I haven't received all the parts yet.  I should be
> able to start late next week.
>
>
> Bob W.
>
> --
> http://www.bob-white.com
> N93BD - Rotary Powered BD-4 (real soon)
>


----------------------------------------------------------------------------
----


> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>