|
|
That's what I was afraid of but I didn't know what was to high.
Ken
Ken; I have seen bearing failure from to much oil press, separation of base
and surface metal. First I would try a new filter from a different source
and if that isn't the cause, would check the relief spring. JohnD
----- Original Message -----
From: "Ken Welter" <rotary.coot@verizon.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Friday, May 27, 2005 5:15 PM
Subject: [FlyRotary] Oil pressure
Anyone out there have an opinion if 125 psi is to high for the oil
pressure ???
I just installed a new engine and all my other ones ran at about 80
to 90 psi and this one is 125, I don't know why as all the plumbing
is the same.
> Ken Welter
|
|