Ken;  I have seen bearing failure from to much oil press, separation of base
and surface metal.   First I would try a new filter from a different source
and if that isn't the cause, would check the relief spring.  JohnD
----- Original Message -----
From: "Ken Welter" <rotary.coot@verizon.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Friday, May 27, 2005 5:15 PM
Subject: [FlyRotary] Oil pressure


>    Anyone out there have an opinion if 125 psi is to high for the oil
> pressure ???
>   I just installed a new engine and all my other ones ran at about 80
> to 90 psi and this one is 125, I don't know why as all the plumbing
> is the same.
>    Ken Welter
>
> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>