|
|
At 07:57 PM 5/26/2005, you wrote:
Hi Bill,
I would need to see the wiring diagram for your EC2 to be sure.
I ordered it just today, so it will be a few months before i have it.
There
are two versions for the 13B depending on whether Mazda coils or LS1
coils are used. The difference is just one extra output for the LS1
coils, so the same cable can be used for the Mazda by leaving that wire
unconnected. I can't imagine the Renesis would be different enough
to change the cost.
I plan on using the stock RX8 coils. They are compact and they are free at this point.
I would like to get a specification sheet worked up so that we can be
sure you're getting exactly what you want. If you can send me a copy
of the wiring diagram from your EC2 manual it would be useful to take a
look at it ahead of time.
Six injectors all together on the 6 port.
It will be next week before I have all the parts and can start making
cables. I have enough wire on hand for two cables almost. I will let
you know when I can accept an order.
Looking forward,
Bill Dube <LED@Killacycle.com>
http://www.killacycle.com/Lights.htm
|
|