Hi Buly,

Yes, I would like one of those myself!  I spent quite a long time
trying to mount my LS1 coils, and currently have a crapy system that
will have to be replaced before flight.  I have some sheet metal
brackets that I think are going to vibrate like crazy, if they don't
fall off first.  They are mounted on the top of the engine where a lot
of installations have the intake manifold tubes.  I also have the GM
cable connecting the 4 coils to a 7 wire (I think) connector.  There is
room for improvement there, but I do like the auto connectors which are
sealed up pretty good when mated.

Another item I'm thinking about is a module with the coil and injector
disable switches and with provisions for the resistors for the peak and
hold injectors.  Tracy specs a 10 amp switch for the injector disable
circuit.  As far as I can tell, the only toggle switches rated for 10 A
DC are the full size toggles.  

Bob W.

On Thu, 26 May 2005 22:14:56 -0400
<atlasyts@bellsouth.net> wrote:

> Bob, I think there would be demand also for LS-1 coils on a mount and pre-wired with color coded leads ready to go?
> Buly
>
>
> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>
>


--
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (real soon)