Sent: Wednesday, April 13, 2005
12:02 AM
Subject: [FlyRotary] Re: Fw: Rx-8
Rotors useable in 91 13B?
Bill,
If you find out before I do will you let me know about the
additional depth to be cut.
On the balancing; I have to cover all that with my one rotor ( no
biggie), I can give you all that stuff a little down the track it will
only require lightening the counter balance weights a
little.
The e-shaft is the same, the rotors lighter = lighter balance
weights.
There may be some oil volume difference (read weight) , but
I should have that soon, as well the rotor weight. BTW Tracy's apex
seals are 33 grams ( per rotor) - got them to-day.
Has anyone got a set of new Mazda apex seals handy to weigh - I
guess there wouldn't be much in it anyway - just curious!
George ( down under)
I am going to look
into this a bit more and find out how much to mill a rotor. A
lighter rotor => more rpms without increasing
stress?
Ed Don't forget lighter rotors would require different balance
weights. I have heard from various sources that the Renesis rotor
was lighter and then that they weigh the same! Both from usually
reliable sources, go figure.
Bill Jepson
George,
the apex seals do not go into the balance equation because they
are not attached to the rotor.
Just my 2c.
Richard Sohn
N-2071U