----- Original Message -----
Sent: Wednesday, April 13, 2005 12:02
AM
Subject: [FlyRotary] Re: Fw: Rx-8 Rotors
useable in 91 13B?
Bill,
If you find out before I do will you let me know about the additional
depth to be cut.
On the balancing; I have to cover all that with my one rotor ( no
biggie), I can give you all that stuff a little down the track it will only
require lightening the counter balance weights a little.
The e-shaft is the same, the rotors lighter = lighter balance
weights.
There may be some oil volume difference (read weight) , but I should
have that soon, as well the rotor weight. BTW Tracy's apex seals are 33 grams
( per rotor) - got them to-day.
Has anyone got a set of new Mazda apex seals handy to weigh - I guess
there wouldn't be much in it anyway - just curious!
George ( down under)
I am going to look into this a bit more
and find out how much to mill a rotor. A lighter rotor => more rpms
without increasing stress?
Ed Don't forget lighter rotors would require different balance weights.
I have heard from various sources that the Renesis rotor was lighter and
then that they weigh the same! Both from usually reliable sources, go
figure.
Bill Jepson
George,
the apex seals do not go into the balance equation because they are not
attached to the rotor.
Just my 2c.
Richard Sohn
N-2071U