Hi
Jerry;
The passages inside the
adapter block are 1 1/16" at their smallest. The reason for this is, in order to
fabricate the hose nipples, I used 1" aluminium electrical conduit. It has an ID
1 1/16" and an OD of 1 3/16". I cut shallow rings around the diameter to
function as hose barbs. Once welded onto the block in the desired position, I
used a die grinder to flow port the inside of the block. This works well to
create hose nipps for 1.25" rad hose.
I'd
planned to post the pics tonight, but there is too many to post at their current
size, so I'll reduce the size of them tomorrow and rename them with more
description titles.
The
last week of playoff hockey wore me out, so I'm going to try to get to
sleep early tonight.
Todd
Thanks Todd, Please do post the
pictures. Tell me again what size
are the passages within the adaptor
block? Jerry
On Monday, April 11, 2005, at 03:00 AM, Todd
Bartrim wrote:
|