Thanks Ed,

I'm pretty much stuck with AN for now as I have practically everything set up
for it.  With the reusable fittings, I'm hoping that I can replace the hose
ever so often and keep using the fittings.  The hoses I had made were basically
heater hose with AN fittings attached.  The AN fittings were steel and I had
leaks in about 1/2 my joints to start with because none of the lengths came out
quite right.  They sure are aggravating.  The Earl's fittings are aluminum and
the Pro-Lite hose is not to heavy either.

Bob W.

On Thu, 24 Mar 2005 22:34:48 -0500
"Ed Anderson" <eanderson@carolina.rr.com> wrote:

> Bob, I used AN-16 SS for my coolant system.  But, were I to do it over, I
> would buy good quality radiator hose and change it every two years.  Save
> some weight, aggravation and one heck of a lot of money.
>

--
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (real soon)