Mailing List flyrotary@lancaironline.net Message #18962
From: Ed Anderson <eanderson@carolina.rr.com>
Subject: Re: [FlyRotary] Re: Auto Programming test
Date: Thu, 17 Mar 2005 21:56:39 -0500
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Ok, Tracy. If I left you more than one beer, have a second, hell have three.  In fact, made a note to ship a no-programming chip to Ed Anderson as soon as you wake up ..as soon as you wake up... as soon as you wake up.  On second thought, if I don't have the mixture control to play with - the engine doesn't need me and  what will I do with my right hand?  Cute answers acceptable - naughty one are not {:>).
 
Ed A
----- Original Message -----
Sent: Thursday, March 17, 2005 9:36 PM
Subject: [FlyRotary] Re: Auto Programming test

Great News!! have one for me too!
Dennis H.

Tracy Crook wrote:
Finally got quasi-legal VFR conditions for a short flight today and declared total success for the auto-program mode on the EC2-EM2 combination.
 
Test started with the all zero default MAP table on the EC2 (no programming at all).   After a 12 minute ground run (slowly increasing throttle from idle to about 16" MAP) followed by a 35 minute flight,  the EC2 was programmed better than I have been able to do after years of manual tweaking.  Absolutely Magic!  Very cool watching it happen on the EM2 screen too.
 
Tracy  (Miller time)
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster