Dang it Kevin, slow down, your getting ahead of me! Looks
real nice though. My original headers were welded just like yours (on
outside of flange) and I only had one minor crack that I fixed. The racer
guys recommend welding pipes on the inside of flange and I did that on the
Renesis manifold. Too early to say if it works better or not.
Tracy
I have my engine upside down right now
while I work out oil cooler location. My welder gave me some 321, so
that's why the front rotor has an additional weld. That plywood box is a
spintech muffler mock-up, although it's not in place. I plan to run it
against the fire wall. With my belly scoop I can't run the exhaust down
there (damn!), so it will go out the side, a la turbine engine I guess.
I was lucky to have the welded up part able to slide on around the engine
mount, easy to forget when you are playing with individual
pieces.
>>
Homepage: http://www.flyrotary.com/
>>
Archive:
http://lancaironline.net/lists/flyrotary/List.html