Mailing List flyrotary@lancaironline.net Message #18233
From: William <wschertz@ispwest.com>
Subject: Re: [FlyRotary] laser parts
Date: Tue, 1 Mar 2005 22:42:48 -0600
To: Rotary motors in aircraft <flyrotary@lancaironline.net>, kevin lane <n3773@comcast.net>
Kevin,
Can you give more information on the service, like contact points/info, location, etc?
Bill Schertz
KIS Cruiser # 4045
----- Original Message -----
From: kevin lane
Sent: Tuesday, March 01, 2005 6:32 PM
Subject: [FlyRotary] laser parts

my flanges came back from Laser Cutting Services.  They have been great people to deal with.  I left the slug in the one flange to show how thin a cut the laser makes.  Apparently water jet cutting produces even a finer cut, but for small production runs laser is cheaper.  These are 3/8" 304 stainless. They cost almost the same price as I was getting quoted for raw materials, ($25/each), and knowing how hard stainless is to work with, an easy decision.
Kevin Lane  Portland, OR
e-mail-> n3773@comcast.net
web-> http://home.comcast.net/~n3773
(browse w/ internet explorer)
----- Original Message -----
Sent: Tuesday, March 01, 2005 4:20 PM
Subject: [FlyRotary] Re: EfI Filter Size

Thanks Ed.


From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Ed Anderson
Sent: Tuesday, March 01, 2005 5:05 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: EfI Filter Size

Hi Bobby,
 
Here is what I have used for over 260 hours of flying.  They are GM EFI fuel filters come as either thread fittings or hose/clamp type.  They can be found in every auto parts store, they are cheap ($5-$7) and they work fine.
 
I use a coarse screen filter between the tanks and EFI pumps. 
 
Ed Anderson
 
Fuel Filters: OEM Auto Fuel Injector Fuel Filters (Two in Parallel)

Type: AC GF - 481 Pkg: 25056052 OEM:25055129 (or equivalent)

Fittings: 3/8 Saginaw to AN6 Adapter, "O" ring required

----- Original Message -----
Sent: Tuesday, March 01, 2005 5:36 PM
Subject: [FlyRotary] EfI Filter Size

What is the consensus on EFI filter size. 100 , 40 , 10 microns? This is between the pumps and fuel rail.
 
Also, is anyone using filters / filter between the tanks and the EFI pumps?
 
Thanks,
 
Bobby Hughes


>>  Homepage:  http://www.flyrotary.com/
>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster