----- Original Message -----
Sent: Thursday, February 24, 2005 7:23
PM
Subject: [FlyRotary] oil filter adapter,
part 1
Greetings,
While Paul was playing
with foam today (practicing to come do my oil cooler scoop I hope <g>),
I was filling the garage with aluminum chips. Attached are some pics of
the adapter that I made to bolt to the rear housing. I'm pretty damn
proud of it, so if you have any negative complaints, keep them to yourself
:-)
To explain the fittings,
my oil cooler has one inlet, and two outlets. I decided to sent the
normal AN-12 outlet to the AN-12 fitting that you see on this adapter.
This connects the outlet tank of the oil cooler to the regulator. The
other outlet of the cooler will be an AN-8 hose that goes to the inlet of the
filter (see oil filter adapter part two tomorrow). The outlet of the
filter goes to the AN-8 fitting that you see on this adapter. There is
also an oil temp sender mounted in the adapter.
Have I mentioned that I
love having the tools to do this stuff :-)
Cheers,
Rusty (irritating the
Sonerai guys with my blasphemous rotary plans)
>> Homepage:
http://www.flyrotary.com/
>> Archive:
http://lancaironline.net/lists/flyrotary/List.html
---
Outgoing mail is certified Virus Free.
Checked by AVG
anti-virus system (
http://www.grisoft.com).
Version: 6.0.859
/ Virus Database: 585 - Release Date: 2/15/2005