|
Message
Greetings,
While Paul was playing with
foam today (practicing to come do my oil cooler scoop I hope <g>), I was
filling the garage with aluminum chips. Attached are some pics of the
adapter that I made to bolt to the rear housing. I'm pretty damn proud of
it, so if you have any negative complaints, keep them to yourself
:-)
To explain the fittings, my
oil cooler has one inlet, and two outlets. I decided to sent the normal
AN-12 outlet to the AN-12 fitting that you see on this adapter. This
connects the outlet tank of the oil cooler to the regulator. The other
outlet of the cooler will be an AN-8 hose that goes to the inlet of the filter
(see oil filter adapter part two tomorrow). The outlet of the filter goes
to the AN-8 fitting that you see on this adapter. There is also an oil
temp sender mounted in the adapter.
Have I mentioned that I
love having the tools to do this stuff :-)
Cheers,
Rusty (irritating the
Sonerai guys with my blasphemous rotary plans)
|