Return-Path: Sender: (Marvin Kaye) To: flyrotary Date: Fri, 04 Oct 2002 19:16:21 -0400 Message-ID: X-Original-Return-Path: <13brv3@mchsi.com> Received: from sccmmhc01.mchsi.com ([204.127.203.183] verified) by logan.com (CommuniGate Pro SMTP 4.0b8) with ESMTP id 1797826 for flyrotary@lancaironline.net; Fri, 04 Oct 2002 11:49:16 -0400 Received: from rad ([12.218.64.232]) by sccmmhc01.mchsi.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with SMTP id <20021004154915.JLYV3589.sccmmhc01.mchsi.com@rad> for ; Fri, 4 Oct 2002 15:49:15 +0000 Reply-To: <13brv3@mchsi.com> From: <13brv3@mchsi.com> X-Original-To: "Rotary motors in aircraft" Subject: RE: [FlyRotary] Re: turbo sizing common sense..... X-Original-Date: Fri, 4 Oct 2002 10:49:17 -0500 X-Original-Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106 If you just normalize, I would imagine you should be OK up to a pretty reasonable altitude. Mike C. -------------- I've just spent some time looking for a compressor map for the stock turbo, and I don't think it's available. The question comes up on the RX-7 list on occasion, and no one ever has a map to offer. I also ran some numbers to compare what folks are doing with 2nd gen cars, and what I propose to do with the plane. Some folks are running up to 13 psi of boost with S5 turbos at road altitudes. Keep in mind that we have roads that are thousands of feet sea level (not here in FL of course ), and the largest change in pressure occurs in the first few thousand feet, so cars are not sea level only devices. For the sake of argument, I compared a 13 psi turbo at sea level, with a normalized turbo at altitude. From the way I look at it, 7 psi of boost would normalize my engine right up to about the 18,000 ft VFR ceiling. Even at that altitude, the pressure ratio is only a hair above what the 13 psi car guys will see. To me, this looks like I'll easily be staying within a known, and well tested limit of the turbo, as long as I can refrain from turning up the boost knob :-) Anyone see any flaw with my logic? Cheers, Rusty Turbo 13B powered RV-3... Be Afraid :-) 1993 RX-7 R1... Stock (for now)