Greetings,
I intended to use an HP1 racing filter, but thought it
wouldn’t fit, so I picked up a shorter PH43 filter. As it
turns out, I was able to fit the larger filter by turning it about 45 degrees
from vertical, but when I was considering the other filter, I asked Fram for
the pressure rating. Here’s their reply for both filters in case
anyone is interested.
Cheers,
Rusty
Fram’s reply:
The PH43 has a burst
pressure rating of 200 PSI. The recommended operating pressure should not
exceed 80 PSI.
The HP1 has a burst pressure
rating of 500 PSI. The recommended operating pressure should not exceed
200 PSI.