Return-Path: Sender: (Marvin Kaye) To: flyrotary Date: Mon, 12 May 2003 00:39:12 -0400 Message-ID: X-Original-Return-Path: Received: from [65.54.169.57] (HELO hotmail.com) by logan.com (CommuniGate Pro SMTP 4.1b6) with ESMTP id 2344217 for flyrotary@lancaironline.net; Sun, 11 May 2003 23:53:32 -0400 Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sun, 11 May 2003 20:53:31 -0700 Received: from 67.243.12.122 by bay3-dav27.bay3.hotmail.com with DAV; Mon, 12 May 2003 03:53:30 +0000 X-Originating-IP: [67.243.12.122] X-Originating-Email: [lors01@msn.com] Reply-To: "Tracy Crook" From: "Tracy Crook" X-Original-To: "Rotary motors in aircraft" References: Subject: Re: [FlyRotary] Re: plastic plane question X-Original-Date: Sun, 11 May 2003 23:54:12 -0400 Organization: Real World Solutions Inc. MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1158 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 X-Original-Message-ID: X-OriginalArrivalTime: 12 May 2003 03:53:31.0224 (UTC) FILETIME=[0D9F9D80:01C3183A] > Posted for "William" : > > No question that the 'pour foam' or great stuff sands easier, but it does > NOT dissolve in acetone like the pink or blue styrofoam. If you use the > pink/blue material, fill it after getting it to rough shape and then sand > the filler. Don't use bondo, it will attack the pink material. > > Bill Schertz Don't forget good old modeling clay either. This is my favorite male mold material for small bumps and intersection fairings. Spray with PVA or cover with electrical tape for release. Tracy Crook