Message

Return-Path: Sender: (Marvin Kaye) To: flyrotary Date: Sun, 30 Mar 2003 22:07:33 -0500 Message-ID: X-Original-Return-Path: <13brv3@mchsi.com> Received: from sccmmhc02.mchsi.com ([204.127.203.184] verified) by logan.com (CommuniGate Pro SMTP 4.1b2) with ESMTP id 2092598 for flyrotary@lancaironline.net; Sun, 30 Mar 2003 09:54:36 -0500 Received: from rad ([12.218.74.116]) by sccmmhc02.mchsi.com (InterMail vM.4.01.03.27 201-229-121-127-20010626) with ESMTP id <20030330145433.DXFH8681.sccmmhc02.mchsi.com@rad> for ; Sun, 30 Mar 2003 14:54:33 +0000 Reply-To: <13brv3@mchsi.com> From: <13brv3@mchsi.com> X-Original-To: "'Rotary motors in aircraft'" Subject: RE: [FlyRotary] Re: Ooooppps! : [FlyRotary] Re: AN16 hose fitting question X-Original-Date: Sun, 30 Mar 2003 08:54:22 -0600 X-Original-Message-ID: <000001c2f6cc$43181c10$0201a8c0@rad> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0001_01C2F699.F87DAC10" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.4510 Importance: Normal In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106 This is a multi-part message in MIME format. ------=_NextPart_000_0001_01C2F699.F87DAC10 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable By the way, Rusty if you have 3/4" of good threads, then you really = don't need to expoy the fitting in. A large soft aluminum washer has sealed = my AN16 adapter into the pump inlet just fine. =20 =20 On further inspection, the threads were a bit shallow on one side, but = the fitting tightened up OK. As added insurance, I used the JB Weld (first = time I've ever used this stuff), and it came out great. I'll be keeping a = close eye on it, but I'm betting it would take a hack saw to get it off :-) =20 =20 Cheers, Rusty =20 ------=_NextPart_000_0001_01C2F699.F87DAC10 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Message

By the way, Rusty if you have 3/4" of good = threads, then=20 you really don't need to expoy the fitting in. A large soft = aluminum=20 washer has sealed my AN16 adapter into the pump inlet just=20 fine.

On further inspection, the threads were a bit = shallow on one=20 side, but the fitting tightened up OK. As added insurance, I used = the JB=20 Weld (first time I've ever used this stuff), and it came=20 out great. I'll be keeping a close eye on it, but = I'm betting it=20 would take a hack saw to get it off = :-)

Cheers,

Rusty

------=_NextPart_000_0001_01C2F699.F87DAC10--