Mailing List flyrotary@lancaironline.net Message #13447
From: Steve Brooks <prvt_pilot@yahoo.com>
Subject: RE: [FlyRotary] Re: Bed mount
Date: Sat, 4 Dec 2004 09:01:49 -0500
To: 'Rotary motors in aircraft' <flyrotary@lancaironline.net>
Dana & Ed,
Here is an article that I found that tells how to do the electrical process.
It comes from a paintball news letter, but looks like a fairly easy process.
Also appears that you can make it whatever color you want, which is kind of
surprising.

http://www.paintballtimes.com/Article.asp?ID=74


Steve Brooks

-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]On
Behalf Of Ed Anderson
Sent: Saturday, December 04, 2004 8:50 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Bed mount


Make certain  you get the "gold colored" chemicals if you do it yourself.
They also sell it as a clear which does not impart any color to the part.
Also, the chemical alodyning does not produce as deep/brilliant a color as
does the electrical process which I believe Fred uses
.

Ed Anderson
----- Original Message -----
From: "Steve BRooks" <prvt_pilot@yahoo.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Saturday, December 04, 2004 8:39 AM
Subject: [FlyRotary] Re: Bed mount


> Dana,
> You could anodize the plate yourself.  Aircraft Spruce, I believe, sells
the
> chemicals to do it.  I've never done it, but there was a discussion about
it
> a few months ago on the Cozy builders group.  I could search the archives
> for the How to do it", if you need it.
>
> Steve Brooks
>
>
> -----Original Message-----
> From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]On
> Behalf Of Dana Overall
> Sent: Saturday, December 04, 2004 6:07 AM
> To: Rotary motors in aircraft
> Subject: [FlyRotary] Bed mount
>
>
> Got my engine mount from Fred and have a question for the group.  Fred no
> longer anodizes the bed plate.  Since every piece on my airplane is either
> black, or gold powder coated I want to do something with that plate.
>
>
> Will 500 degree engine paint on that plate hold up to having the engine
> bolted to it??
>
>
>
> Dana Overall
> Richmond, KY i39
> RV-7 slider, Imron black, "Black Magic"
> Finish kit
> 13B Rotary. Hangar flying my Dynon.
> http://rvflying.tripod.com
> http://rvflying.tripod.com/blackrudder.jpg
> do not archive
>
>
>
> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>
>
> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>



>>  Homepage:  http://www.flyrotary.com/
>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster