Received-SPF: none
 receiver=logan.com; client-ip=66.163.170.9; envelope-from=prvt_pilot@yahoo.com
Reply-To: <prvt_pilot@yahoo.com>
From: "Steve BRooks" <prvt_pilot@yahoo.com>
To: "'Rotary motors in aircraft'" <flyrotary@lancaironline.net>
Subject: RE: [FlyRotary] Bed mount
Date: Sat, 4 Dec 2004 08:39:51 -0500
Message-ID: <005b01c4da06$bbca1ae0$6b01a8c0@workgroup.com>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Importance: Normal
In-reply-to: <list-555693@logan.com>

Dana,
You could anodize the plate yourself.  Aircraft Spruce, I believe, sells the
chemicals to do it.  I've never done it, but there was a discussion about it
a few months ago on the Cozy builders group.  I could search the archives
for the How to do it", if you need it.

Steve Brooks


-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]On
Behalf Of Dana Overall
Sent: Saturday, December 04, 2004 6:07 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Bed mount


Got my engine mount from Fred and have a question for the group.  Fred no
longer anodizes the bed plate.  Since every piece on my airplane is either
black, or gold powder coated I want to do something with that plate.


Will 500 degree engine paint on that plate hold up to having the engine
bolted to it??


Dana Overall
Richmond, KY i39
RV-7 slider, Imron black, "Black Magic"
Finish kit
13B Rotary. Hangar flying my Dynon.
http://rvflying.tripod.com
http://rvflying.tripod.com/blackrudder.jpg
do not archive


>>  Homepage:  http://www.flyrotary.com/
>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html