Received-SPF: none
 receiver=logan.com; client-ip=68.230.241.38; envelope-from=rogersda@cox.net
From: Dale Rogers <rogersda@cox.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Yoke ends, rod ends, clevis ends
Date: Thu, 2 Dec 2004 11:39:02 -0500
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Message-Id: <20041202163902.KIPR16894.fed1rmmtao01.cox.net@smtp.west.cox.net>

It appears that the vendor has already sold out on this 
item.

Dale R.
COZY MkIV #1254

 
> From: "Chris Sargent" <rv7rotary@knology.net>
> Date: 2004/12/01 Wed PM 08:47:46 EST
> To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
> Subject: [FlyRotary] Yoke ends, rod ends, clevis ends
> 
> MessageHere's an eBay link for rod ends, 10-32 threads, forged steel, $3 per
> dozen @ $3.85 S&H.  I purchased a dozen and am very pleased with them.  At
> $6.85 that's less than 60 cents each ($5 apiece at Van's).  The seller
> purchased them surplus and has about 90 remaining.  He will sell multiple
> dozens for $3 per dozen with a fixed S&H of $3.85, no matter how many you
> purchase.
> 
> The bearing surface (where the pin goes through) is machined, as are the
> outer and inner faces.
> 
> The Van's variety are machined while these are forged, but I think you'll
> find these are more than strong enough for any purpose we have.
> 
> Chris Sargent