Return-Path: Received: from ns5.rokland.us ([67.15.10.31] verified) by logan.com (CommuniGate Pro SMTP 4.2.5) with ESMTP-TLS id 531882 for flyrotary@lancaironline.net; Sun, 14 Nov 2004 10:50:04 -0500 Received-SPF: none receiver=logan.com; client-ip=67.15.10.31; envelope-from=bob@bob-white.com Received: from bgp01386375bgs.brodwy01.nm.comcast.net ([68.35.160.229] helo=localhost) by ns5.rokland.us with smtp (Exim 4.43) id 1CTMdR-0005dD-J8 for flyrotary@lancaironline.net; Sun, 14 Nov 2004 09:49:49 -0600 Date: Sun, 14 Nov 2004 08:49:48 -0700 From: Bob White To: "Rotary motors in aircraft" Subject: Re: [FlyRotary] Re: EWP Testing Message-Id: <20041114084948.233980ec.bob@bob-white.com> In-Reply-To: References: X-Mailer: Sylpheed version 1.0.0beta2 (GTK+ 1.2.10; i686-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit X-Antivirus-Scanner: Clean mail though you should still use an Antivirus X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - ns5.rokland.us X-AntiAbuse: Original Domain - lancaironline.net X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12] X-AntiAbuse: Sender Address Domain - bob-white.com X-Source: X-Source-Args: X-Source-Dir: Thanks Bill, I'm kind of wondering if the difference might boost the output flow from 16 GPM to the 20 GPM advertised or is it something to do with the way I'm testing. I still need to think about the square law and see if I can salvage anything from my calculations. Does it matter if flow is laminar or turbulent and aren't engine blocks and radiators intended to use turbulent flow? Bob White On Sun, 14 Nov 2004 09:16:57 -0600 "William" wrote: > The lower viscosity at 180 allows a higher flow. I am away from my > reference books, but will try to look up the effect in a couple of > days. > > Bill Schertz > KIS Cruiser # 4045 > ----- Original Message ----- > From: "Bob White" > To: "Rotary motors in aircraft" > Sent: Saturday, November 13, 2004 9:44 PM > Subject: [FlyRotary] Re: EWP Testing > > > > On Sat, 13 Nov 2004 20:52:22 -0600 > > "William" wrote: > > > > Hi Bill, > > > > I was just looking at the viscosity of water. It varies from 1.31 > > cp at 40 deg to 0.347 cp at 180 deg. What does that do to the flow > > rate everything else staying the same? > > > > > > Bob White > > > >> Bob, > >> Pressure drop through a core is usually linear with the square of > >the> flow rate, both for pumps and radiators. > >> > >> The point marked "real rad test" has my two evap cores in parallel > >> being pumped by the mazda pump. > >> > >> Pumps in series add pressure, pumps in parallel add flow rate. > >> Bill Schertz > >> KIS Cruiser # 4045 > > > > > > -- > > http://www.bob-white.com > > N93BD - Rotary Powered BD-4 (soon) > > > >>> Homepage: http://www.flyrotary.com/ > >>> Archive: http://lancaironline.net/lists/flyrotary/List.html > > > >> Homepage: http://www.flyrotary.com/ > >> Archive: http://lancaironline.net/lists/flyrotary/List.html > > -- http://www.bob-white.com N93BD - Rotary Powered BD-4 (soon)