Received-SPF: none
 receiver=logan.com; client-ip=67.15.10.31; envelope-from=bob@bob-white.com
Date: Sun, 7 Nov 2004 09:03:06 -0700
From: Bob White <bob@bob-white.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: EWP Info
Message-Id: <20041107090306.2125c036.bob@bob-white.com>
In-Reply-To: <list-521189@logan.com>
References: <list-521189@logan.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

On Sat, 6 Nov 2004 22:22:28 -0800
"Al Gietzen" <ALVentures@cox.net> wrote:

>  
> 
> I don't know what the numbers mean but I will let you know how it
> works
> 
> out.  Todd reported his pump measured 4.3 amps at 9.3 gpm (if I
> 
> understood his last post).  Mezarie may be reporting the "no load"
> 
> pumping capacity, or Summit may have the current wrong.  I should have
> 
> the pumps sometime next week.
> 
>  
> 
> Any idea what a ball park figure for the pressure drop across the
> engine
> 
> and an evap core would be?  I could simulate it on the bench.
> 
>  
> 
> Bob White
> 
>  
> 
> Bob;
> 
>  
> 
> Paul Lamar is looking for one of these pumps to do the tests.  He
> already has the loop set up with flow and pressure measuring.  Why
> don't you send the pump to him and let him do the tests?
> 
>  
> 
> Al
> 
> 
Hi Al,

I thought about offering to buy one of the WP136's for Paul to test when
he made the offer. I had already decided a while back that I was going
to set up an EWP on my plane, but hadn't decided which pump(s) or how I
was going to configure them.  I am glad to see Paul make the offer to do
some testing.  I may work something out with him to do the measurements
but would like to check them out first myself.

Bob White


-- 
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (soon)