Return-Path: Received: from fed1rmmtao09.cox.net ([68.230.241.30] verified) by logan.com (CommuniGate Pro SMTP 4.2.4) with ESMTP id 452942 for flyrotary@lancaironline.net; Tue, 05 Oct 2004 01:22:39 -0400 Received-SPF: none receiver=logan.com; client-ip=68.230.241.30; envelope-from=ALVentures@cox.net Received: from BigAl ([68.107.116.221]) by fed1rmmtao09.cox.net (InterMail vM.6.01.03.04 201-2131-111-106-20040729) with ESMTP id <20041005052209.FVGE14638.fed1rmmtao09.cox.net@BigAl> for ; Tue, 5 Oct 2004 01:22:09 -0400 From: "Al Gietzen" To: "'Rotary motors in aircraft'" Subject: RE: [FlyRotary] Low power 20B operation Date: Mon, 4 Oct 2004 22:22:24 -0700 Message-ID: <000001c4aa9b$4c5de050$6400a8c0@BigAl> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0001_01C4AA60.9FFF0850" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.6626 Importance: Normal In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 This is a multi-part message in MIME format. ------=_NextPart_000_0001_01C4AA60.9FFF0850 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Only the 20B version of the EC2 uses the staging relay. I think Al is correct. There is something causing it not to be staged when it should = be. That problem must be found and corrected before anything else can be = guessed at. I hope it's not an error in the instructions. I'll review the 20B design and get some questions & tests to you Al. =20 Thanks, Tracy. You'll recall that this EC2 operated normally for the = dyno runs with the same wiring harness, just different routing of the wires. Same relay - same wires. But it was back for updating since then, so = there if an error is in there, I guess it had to introduced at the updating. =20 Al ------=_NextPart_000_0001_01C4AA60.9FFF0850 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

Only the 20B version of the = EC2 uses the staging relay.  I think Al is correct.  There is = something causing it not to be staged when it should be.  That problem must = be found and corrected before anything else can be guessed at.  I hope it's = not an error in the instructions.  I'll review the 20B design and get some questions & tests to you Al.

 

Thanks, Tracy.  You’ll recall that this EC2 operated normally = for the dyno runs with the same wiring harness, just different routing of = the wires.  Same relay - same wires.  But it was back for updating = since then, so there if an error is in there, I guess it had to introduced at = the updating.

 <= /font>

Al

------=_NextPart_000_0001_01C4AA60.9FFF0850--