Received-SPF: none
 receiver=logan.com; client-ip=65.23.108.44; envelope-from=prvt_pilot@yahoo.com
Reply-To: <prvt_pilot@yahoo.com>
From: "Steve Brooks" <prvt_pilot@yahoo.com>
To: "'Rotary motors in aircraft'" <flyrotary@lancaironline.net>
Subject: RE: [FlyRotary] Re: Cooling Version 2.1
Date: Sun, 3 Oct 2004 07:44:25 -0400
Message-ID: <001901c4a93e$586ab070$6400a8c0@workgroup.com>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Importance: Normal
In-Reply-To: <list-450731@logan.com>

John,
as you can tell, I didn't make it to RR either.  We are in the process of
moving from South Carolina back to the Raleigh, NC area, so it has been a
little hectic.  The actual move is about a month away, but I've been trying
to get my cooling issues solved, so that I can get some hours on the plane.

Good luck on the hanger door. That's got to be a pain.

Steve

-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]On
Behalf Of John Slade
Sent: Saturday, October 02, 2004 5:54 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Cooling Version 2.1


Looks good, Steve. I hope the new setup works out.

I got a new PCM (panel for the EC2) from Tracy and installed it today.

I'd be ready to fly too, if I could just get the $#@%ing hangar door open.
The door came off it's runners and I have to spend tomorrow fixing it.

John (wishing I was at Rough River)


>>  Homepage:  http://www.flyrotary.com/
>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html