|
|
Posted for Finn Lassen <finnlassen@netzero.net>:
Given that this installation has never run, much less run, I'd be extreemely weary of duplicating it.
Note there is practically no head room for air to escape out of the water stream.
It's already bad in my installation, where there at least a a couple of cubic inches.
Finn
William wrote:
Here are some pictures of a cut down water pump (from the "other" list) I
did mine essentially the same way. Use a band saw to cut off the neck at an
angle, I used a router bit to take out the divider, then welded in a new
divider and welded on an outlet tube.
|
|