Return-Path: <marv@lancaironline.net>
Received: from [209.26.2.158] (account <marv@lancaironline.net>)
  by logan.com (CommuniGate Pro WebUser 4.0.6)
  with HTTP id 2055036 for <flyrotary@lancaironline.net>; Mon, 17 Mar 2003 08:27:50 -0500
From: "Marvin Kaye" <marv@lancaironline.net>
Subject: Re: [FlyRotary] Re: EWP is out, parts needed
To: flyrotary
X-Mailer: CommuniGate Pro Web Mailer v.4.0.6
Date: Mon, 17 Mar 2003 08:27:50 -0500
Message-ID: <web-2055036@logan.com>
In-Reply-To: <3E7495BD.7060801@netzero.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="ISO-8859-1"; format="flowed"
Content-Transfer-Encoding: 8bit

Posted for Finn Lassen <finnlassen@netzero.net>:

Given that this installation has never run, much less run, I'd be extreemely 
weary of duplicating it.
Note there is practically no head room for air to escape out of the water 
stream.
It's already bad in my installation, where there at least a a couple of cubic 
inches.

Finn

William wrote:

>Here are some pictures of a cut down water pump (from the "other" list) I
>did mine essentially the same way. Use a band saw to cut off the neck at an
>angle, I used a router bit to take out the divider, then welded in a new
>divider and welded on an outlet tube.