Received-SPF: none
 receiver=logan.com; client-ip=65.23.108.44; envelope-from=steve@tsisp.com
Reply-To: <steve@tsisp.com>
From: "Steve Brooks" <steve@tsisp.com>
To: "'Rotary motors in aircraft'" <flyrotary@lancaironline.net>
Subject: RE: [FlyRotary] Re: Evaporator Core sealing
Date: Tue, 31 Aug 2004 17:05:31 -0400
Message-ID: <012301c48f9e$40843f30$6400a8c0@WORKGROUP.local>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
In-Reply-To: <list-385754@logan.com>
Importance: Normal

Randy,
Thanks for the suggestion.

Steve

 -----Original Message-----
From: 	Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]  On
Behalf Of randy echtinaw
Sent:	Monday, August 30, 2004 7:42 PM
To:	Rotary motors in aircraft
Subject:	[FlyRotary] Re: Evaporator Core sealing

Expandable insulating foam from an aerosol can. Trim the edges with a
sharp knife after it sets

On Aug 30, 2004, at 1:41 PM, Steve Brooks wrote:

> Does anyone have any real good ways to seal around the sides of the
> evaporator cores ?  I sealed mine top and bottom with weather
> stripping, and
> tried some of it on the sides, but still have allot of leakage.  The
> irregular shape of the sides, ridges and valleys, seems to be the
> problem.
>
> I was thinking about putting saran wrap on the housing/mount, and
> putting
> 100% silicone in to seal them.
>
> Anyone have a better mousetrap ?
>
> Steve Brooks
> Cozy MKIV
> Turbo 13B
>
>
>>>  Homepage:  http://www.flyrotary.com/
>>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>


>>  Homepage:  http://www.flyrotary.com/
>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html